I aim to have orders out of the workshop and on their way within 2–5 days. Larger or fully custom pieces may take a little longer, but don’t worry, you’ll always be kept in the loop throughout the process!
An Easter treat they can use again next year
Fill this personalised wooden bunny with small chocolate eggs for Easter morning, then bring it out again when the next Easter rolls around. A clear acrylic window shows off the treats inside, while the name in gold lettering makes it theirs.
Choose Your Bunny
Pink: With a flower detail
Blue: With a bow detail
How to Order
Choose the bunny style.
Enter the name you’d like on the front.
Check the spelling before placing your order.
Product Details
Wooden bunny Easter egg holder
Clear acrylic window
Personalised name in gold lettering
Designed for small chocolate eggs
Total height to the top of the ears: approximately 225 mm
Height of the egg container section: approximately 130 mm
Depth: approximately 55 mm
Reusable for future Easters
A Note About Eggs
The number it holds will depend on the size of the eggs you use.
I aim to have orders out of the workshop and on their way within 2–5 days. Larger or fully custom pieces may take a little longer, but don’t worry, you’ll always be kept in the loop throughout the process!
I aim to have orders out of the workshop and on their way within 2–5 days. Larger or fully custom pieces may take a little longer, but don’t worry, you’ll always be kept in the loop throughout the process!
Personalised Couple’s Bauble – Celebrate Your Story in Sparkle ✨🎄
Add a personal touch to your Christmas tree with a Couple’s Bauble, customised with your names and the year it all began. Made from quality wood and backed with your choice of glittery red or green, this festive keepsake brings a little romance and a whole lot of sparkle to your holiday décor.
Whether it’s your first Christmas together, your tenth, or anywhere in between—this bauble is a beautiful way to mark your journey.
Size: 85mmBackground options: Sparkly red or sparkly green
I aim to have orders out of the workshop and on their way within 2–5 days. Larger or fully custom pieces may take a little longer, but don’t worry, you’ll always be kept in the loop throughout the process!
I aim to have orders out of the workshop and on their way within 2–5 days. Larger or fully custom pieces may take a little longer, but don’t worry, you’ll always be kept in the loop throughout the process!
Keep your drinks perfectly chilled, with our 350ml personalized tumbler. Featuring double-wall, vacuum insulation, this tumbler is both stylish and functional. With a closable cap, perfect for those sips white out and about!
Choose from several unique designs—whether you’re into wine and true crime or need a little Liquid Therapy, there’s something for everyone!
Suitable for Hot and Cold drinks (Allow boiling liquid to cool slightly before pouring, not suitable for boiling water)Available in Red, Blue and White.
Stay cool, stay stylish, and sip in personalized comfort!
I aim to have orders out of the workshop and on their way within 2–5 days. Larger or fully custom pieces may take a little longer, but don’t worry, you’ll always be kept in the loop throughout the process!
I aim to have orders out of the workshop and on their way within 2–5 days. Larger or fully custom pieces may take a little longer, but don’t worry, you’ll always be kept in the loop throughout the process!
Stackable PS5 Controller Stand – Sleek, Smart, and Built for Gamers
Two controllers, one place to put them when the game is over.
This PS5 controller stand holds two controllers vertically, keeping them together without taking up the space of two separate stands. Its shape takes cues from the PS5 console, so it looks at home on a gaming desk, TV unit or shelf.
Each controller has its own resting spot and is easy to pick up when it’s time to play. The stand is 3D printed to order in Yarrawonga, Victoria, and you can choose your colour from the options above.
Product details
Holds two PS5 controllers in a vertical stack
Keeps controllers together and off the desk
PS5-inspired design
3D printed to order in Australia
Colour options available
A practical PS5 controller holder for a setup with two controllers and limited shelf space.
I aim to have orders out of the workshop and on their way within 2–5 days. Larger or fully custom pieces may take a little longer, but don’t worry, you’ll always be kept in the loop throughout the process!
I aim to have orders out of the workshop and on their way within 2–5 days. Larger or fully custom pieces may take a little longer, but don’t worry, you’ll always be kept in the loop throughout the process!
For the “one more chapter” crowd
“Sleep is good, books are better.” If that sounds like someone you know, this bookmark has their priorities sorted.
The quote and a stack of books are engraved onto PU leather, with a matching tassel to help you find your page when you finally put the book down. Choose black or brown with gold or silver engraving. It’s an easy little gift for a book lover, a teacher or anyone whose to-be-read pile keeps growing despite their best efforts.
Choose Your Finish
Black with gold engraving
Black with silver engraving
Brown with gold engraving
Brown with silver engraving
Product Details
PU leather bookmark
Engraved “Sleep is good, books are better” quote and stack of books
Matching tassel
Choice of black or brown with gold or silver engraving
Engraved to order in Yarrawonga, Victoria
More for Book Lovers
Browse our other bookmarks for more designs, including personalised options.
I aim to have orders out of the workshop and on their way within 2–5 days. Larger or fully custom pieces may take a little longer, but don’t worry, you’ll always be kept in the loop throughout the process!
I aim to have orders out of the workshop and on their way within 2–5 days. Larger or fully custom pieces may take a little longer, but don’t worry, you’ll always be kept in the loop throughout the process!
Retro Gamer Keyrings – Old School Cool, Pocket-Sized
Level up your keychain with these 3D printed Retro Gamer Keyrings, inspired by the golden age of arcades. Available in three iconic designs—Game Over, Game Start, and Insert Coin—each one brings that pixelated nostalgia to life in a bold, durable way.
Measuring 70mm x 34mm, they’re the perfect size to add some retro attitude to your keys, bag, or lanyard. Whether you’re a hardcore gamer or just love a cheeky throwback, these keyrings are built to handle daily life with style.
Features:
Three classic designs: Game Over, Game Start, Insert Coin
Durable 3D printed build that’s lightweight and long-lasting
Compact size—easy to carry, hard to miss
Grab one (or collect them all) and show the world you’ve still got game.
I aim to have orders out of the workshop and on their way within 2–5 days. Larger or fully custom pieces may take a little longer, but don’t worry, you’ll always be kept in the loop throughout the process!
I aim to have orders out of the workshop and on their way within 2–5 days. Larger or fully custom pieces may take a little longer, but don’t worry, you’ll always be kept in the loop throughout the process!
thow it back in style with this retro-inspired Cassette Caddy. Designed to look like a classic mixtape, this bold little box is perfect for holding pens, remotes, makeup brushes, or whatever else needs a home. The front label reads "Mixtape Vol 1" and features textured detail for extra nostalgic goodness.
Built for function, designed for fun — it's the perfect mix of practical and playful.
I aim to have orders out of the workshop and on their way within 2–5 days. Larger or fully custom pieces may take a little longer, but don’t worry, you’ll always be kept in the loop throughout the process!
I aim to have orders out of the workshop and on their way within 2–5 days. Larger or fully custom pieces may take a little longer, but don’t worry, you’ll always be kept in the loop throughout the process!
For the readers who definitely didn’t come for the plot… but stayed for it anyway. This PU leather bookmark features a bold skull and dagger design with Read Spicy engraved front and centre — a little warning to anyone judging your TBR pile.
Available in black or brown PU leather with gold or silver engraving, it’s sturdy enough for daily reading and dramatic enough to match your favourite unhinged book moments. Finished with a matching tassel because even spicy reads deserve good accessories.
Size: approx. 170mm x 60mm x 11mm
I aim to have orders out of the workshop and on their way within 2–5 days. Larger or fully custom pieces may take a little longer, but don’t worry, you’ll always be kept in the loop throughout the process!
I aim to have orders out of the workshop and on their way within 2–5 days. Larger or fully custom pieces may take a little longer, but don’t worry, you’ll always be kept in the loop throughout the process!
Give your desk a dose of personality with the Spinning Block Head! Inspired by the iconic look of classic building block faces, this clever little organiser is perfect for holding pens, pencils, or whatever small chaos is usually scattered across your workspace.
But here's the twist—literally. The head spins to reveal different expressions, so you can match your desk buddy’s mood to your own (even if it's ‘don't talk to me’ energy). Compact, fun, and functional, it’s the perfect mix of organisation and entertainment.
Details:
Size: 100mm x 100mm
Face Swapper: Rotate to switch expressions whenever the vibe changes
Compact but Roomy: Holds pens, pencils, and small supplies without hogging space
Fun for All Ages: Great for workspaces, kids’ desks, or gifting to anyone who needs a smile (or a tidy desk)
Durable & Wipe-Clean: Built to last with quality materials that handle everyday use
Whether you're into fun desk accessories or just need something to glare at your to-do list with you—this Block Head's got your back.
I aim to have orders out of the workshop and on their way within 2–5 days. Larger or fully custom pieces may take a little longer, but don’t worry, you’ll always be kept in the loop throughout the process!
I aim to have orders out of the workshop and on their way within 2–5 days. Larger or fully custom pieces may take a little longer, but don’t worry, you’ll always be kept in the loop throughout the process!
Need a little extra love on your desk or shelf? These Heart Buddy Containers are ready to help! Featuring a stackable design and covered in the cutest smiling hearts, they’re perfect for holding small items, trinkets, or just brightening up your space.
Whether you're gifting or treating yourself, these cheeky little containers bring a smile every time.
I aim to have orders out of the workshop and on their way within 2–5 days. Larger or fully custom pieces may take a little longer, but don’t worry, you’ll always be kept in the loop throughout the process!
I aim to have orders out of the workshop and on their way within 2–5 days. Larger or fully custom pieces may take a little longer, but don’t worry, you’ll always be kept in the loop throughout the process!
A little bit bold, a little bit chaotic. just how it should be.
This sleek bar necklace is engraved with the word “unhinged”, making it the perfect everyday piece with a touch of attitude.
Made from durable stainless steel and available in silver (gold, or rose gold on request), it’s simple enough to wear with anything, but still says exactly what needs to be said. Whether it’s for you or a gift for your favourite slightly unhinged human, this one’s guaranteed to get a reaction.
Finished on a 45cm chain, it sits perfectly for layering or wearing on its own.
I aim to have orders out of the workshop and on their way within 2–5 days. Larger or fully custom pieces may take a little longer, but don’t worry, you’ll always be kept in the loop throughout the process!
I aim to have orders out of the workshop and on their way within 2–5 days. Larger or fully custom pieces may take a little longer, but don’t worry, you’ll always be kept in the loop throughout the process!
Protect your Thermomix and make sliding effortless with these low-profile Thermo Slide Feet. Designed specifically for the TM6, they reduce strain on the sensitive weighing system and let you glide your machine across the bench with ease.
Unlike bulky slider boards, these discreet feet stay out of sight while keeping your machine stable and easy to clean around—no more heavy lifting or dragging.
Just pop them on and enjoy smooth movement, better scale protection, and less mess in your kitchen.
I aim to have orders out of the workshop and on their way within 2–5 days. Larger or fully custom pieces may take a little longer, but don’t worry, you’ll always be kept in the loop throughout the process!
I aim to have orders out of the workshop and on their way within 2–5 days. Larger or fully custom pieces may take a little longer, but don’t worry, you’ll always be kept in the loop throughout the process!
Sweet… but not too sweet. This split bar necklace features the phrase “Be Kind… of a B*tch” engraved across two connected pendants — a perfect little reminder that you can be nice, just not a pushover.
Made from durable stainless steel with a polished finish, it’s designed for everyday wear with just the right amount of attitude. The two-bar design adds a subtle twist, revealing the full message when worn together.
Finished on a 45cm chain, it sits perfectly for layering or wearing solo — depending on how bold you’re feeling that day.
I aim to have orders out of the workshop and on their way within 2–5 days. Larger or fully custom pieces may take a little longer, but don’t worry, you’ll always be kept in the loop throughout the process!
I aim to have orders out of the workshop and on their way within 2–5 days. Larger or fully custom pieces may take a little longer, but don’t worry, you’ll always be kept in the loop throughout the process!
Who says powerpoints have to be boring? These UV printed Clipsal Iconic cover plates turn everyday switches and outlets into a stylish feature. Choose from a growing range of designs or request a custom print to perfectly match your room, décor or personality.
A simple swap can make a surprisingly big difference.
Compatible with Clipsal Iconic products. Cover plate only.
I aim to have orders out of the workshop and on their way within 2–5 days. Larger or fully custom pieces may take a little longer, but don’t worry, you’ll always be kept in the loop throughout the process!
I aim to have orders out of the workshop and on their way within 2–5 days. Larger or fully custom pieces may take a little longer, but don’t worry, you’ll always be kept in the loop throughout the process!
Why settle for boring switches when you can make them your own?
These custom UV printed Clipsal Iconic dollies are designed to add personality, colour and style to your switches. Upload an image or describe what you'd like, and I'll create a custom design to suit your space. Whether you're matching wallpaper, complementing your décor, creating a themed room, or adding a unique finishing touch, the possibilities are almost endless.
Printed in vibrant full colour using UV printing technology for a crisp, durable finish.
Compatible with Clipsal Iconic switches.Dolly/rocker only. Cover plate and switch mechanism not included.
I aim to have orders out of the workshop and on their way within 2–5 days. Larger or fully custom pieces may take a little longer, but don’t worry, you’ll always be kept in the loop throughout the process!
