I aim to have orders out of the workshop and on their way within 2–5 days. Larger or fully custom pieces may take a little longer, but don’t worry, you’ll always be kept in the loop throughout the process!
Retro Gamer Keyrings – Old School Cool, Pocket-Sized
Level up your keychain with these 3D printed Retro Gamer Keyrings, inspired by the golden age of arcades. Available in three iconic designs—Game Over, Game Start, and Insert Coin—each one brings that pixelated nostalgia to life in a bold, durable way.
Measuring 70mm x 34mm, they’re the perfect size to add some retro attitude to your keys, bag, or lanyard. Whether you’re a hardcore gamer or just love a cheeky throwback, these keyrings are built to handle daily life with style.
Features:
Three classic designs: Game Over, Game Start, Insert Coin
Durable 3D printed build that’s lightweight and long-lasting
Compact size—easy to carry, hard to miss
Grab one (or collect them all) and show the world you’ve still got game.
I aim to have orders out of the workshop and on their way within 2–5 days. Larger or fully custom pieces may take a little longer, but don’t worry, you’ll always be kept in the loop throughout the process!
I aim to have orders out of the workshop and on their way within 2–5 days. Larger or fully custom pieces may take a little longer, but don’t worry, you’ll always be kept in the loop throughout the process!
Level up your on-the-go gaming with this ultra-compact Foldable Switch Stand—designed to keep your setup clean, convenient, and comfortable wherever you play.
Folding down to the size of a thick card (just 3/4 inch thick), this stand pops open to raise your Nintendo Switch by 2.5 inches—perfect for better viewing angles, easier controls, and less neck strain.
An adjustable tilt lets you find the sweet spot, while the integrated charging slot keeps your Switch powered mid-game. Whether you’re at a café, on a flight, or grinding through a long cutscene in bed, this stand’s got your back (literally).
Built tough from durable 3D-printed material and sized to go anywhere—this is a must-have for gamers who don’t sit still.
I aim to have orders out of the workshop and on their way within 2–5 days. Larger or fully custom pieces may take a little longer, but don’t worry, you’ll always be kept in the loop throughout the process!
I aim to have orders out of the workshop and on their way within 2–5 days. Larger or fully custom pieces may take a little longer, but don’t worry, you’ll always be kept in the loop throughout the process!
Meet Flexi-Nico — the rainbow rascal you didn’t know your shelf needed. Bursting with personality (and colour), Nico’s that one character who starts as desk decor and ends up your emotional support chaos blob.
He’s flexible, fidget-friendly, and full of charm—whether he’s hanging out on your shelf, stowed in your bag, or showing off in your socials. Nico isn’t just a vibe. He is the vibe.
Sits at approx. 60mm tall.Colour gradient may vary — every Nico is a one-of-a-kind chaos bean.
I aim to have orders out of the workshop and on their way within 2–5 days. Larger or fully custom pieces may take a little longer, but don’t worry, you’ll always be kept in the loop throughout the process!
I aim to have orders out of the workshop and on their way within 2–5 days. Larger or fully custom pieces may take a little longer, but don’t worry, you’ll always be kept in the loop throughout the process!
Light up your workspace with this little Fire Phone Holder, where cuteness meets functionality. Designed to resemble a friendly little flame with a charming face, this phone holder isn’t just adorable, it’s incredibly practical.
Perfect for keeping your phone accessible in both vertical and horizontal orientations, it ensures you’re always ready to catch up on messages or enjoy your favorite videos.
I aim to have orders out of the workshop and on their way within 2–5 days. Larger or fully custom pieces may take a little longer, but don’t worry, you’ll always be kept in the loop throughout the process!
I aim to have orders out of the workshop and on their way within 2–5 days. Larger or fully custom pieces may take a little longer, but don’t worry, you’ll always be kept in the loop throughout the process!
Meet the Filament Misfits—a fun, eco-friendly way to turn printing leftovers into something unique and totally unrepeatable. Crafted from the material left behind during multicoloured prints, each Misfit has its own colour swirl and personality, making it a one-of-a-kind surprise.
Available in bear, bulldog, skull, or other quirky shapes, these small figures range from 5–8cm tall and are made entirely from offcuts that would’ve otherwise gone to waste.
No two are the same, and that’s the point—every Misfit is a second chance object with its own weird charm.
Whether you're after something fun for your desk, a conversation starter, or just want to support a more sustainable way of printing, Filament Misfits deliver.
I aim to have orders out of the workshop and on their way within 2–5 days. Larger or fully custom pieces may take a little longer, but don’t worry, you’ll always be kept in the loop throughout the process!
I aim to have orders out of the workshop and on their way within 2–5 days. Larger or fully custom pieces may take a little longer, but don’t worry, you’ll always be kept in the loop throughout the process!
Printed using DTF (Direct to Film) in a half tone effect for rich, long-lasting colour that doesn’t fade or crack.
Soft, breathable cotton that feels just as good as it looks — perfect for everyday wear, creative days, or nights out that need a little extra edge.
Care instructions
Turn inside out and machine wash cold on a gentle cycle with similar colours.
Use a mild detergent. Do not use bleach or fabric softener.
Line dry in the shade. Do not tumble dry.
Do not iron directly over the print.
Available in multiple shirt styles and colours.Sizes from Small through 1XL (larger or smaller available in some styles — just ask!).Shirt styles and sizing
Printed locally on AS Colour garments. Choose your preferred style, colour and size from the options above. The fit and fabric vary by style:
Women's Classic Tee: Regular fit, 180 GSM combed cotton.
Women's Crop Tee: Relaxed fit with a shorter body and dropped shoulders, 180 GSM combed cotton.
Women's Racerback Singlet: Regular fit with a racerback and curved hem. 160 GSM fabric made from 60% recycled polyester and 40% cotton.
Men's Classic Tee: Regular fit with a crew neck, 180 GSM combed cotton.
Unisex Tank: Relaxed fit, 220 GSM combed cotton.
Need a different size, colour or style? Get in touch and I'll check what's available.
Size guide
These are garment measurements in centimetres, not body measurements. Width is measured across the shirt laid flat, and length is measured from the top of the shoulder to the hem. For the best fit, compare these measurements with a shirt you already own. Measurements may vary by up to 2.5 cm.
Women's Classic Tee
Size
Width (cm)
Length (cm)
XS
45.5
63.5
S
48
64.5
M
50.5
65.5
L
53
66.5
XL
55.5
67.5
XXL
58
68.5
Women's Crop Tee
Size
Width (cm)
Length (cm)
XS
47.5
44
S
50
45
M
52.5
46.5
L
55
47.5
XL
57.5
48.5
XXL
60
49.5
Women's Racerback Singlet
Size
Width (cm)
Length (cm)
XS
38.5
58
S
41
60
M
43.5
62
L
46
64
XL
48.5
66
XXL
51
68
Men's Classic Tee
Size
Width (cm)
Length (cm)
XS
43
68
S
47
71
M
52
75
L
56.5
78.5
XL
61
82
XXL
64
83.5
Unisex Tank
Size
Width (cm)
Length (cm)
S
47.5
70
M
52
74
L
56.5
77.5
XL
61
81
XXL
65.5
84
I aim to have orders out of the workshop and on their way within 2–5 days. Larger or fully custom pieces may take a little longer, but don’t worry, you’ll always be kept in the loop throughout the process!
I aim to have orders out of the workshop and on their way within 2–5 days. Larger or fully custom pieces may take a little longer, but don’t worry, you’ll always be kept in the loop throughout the process!
Electrical Tape Dispenser – Built for the Job Site ⚡🔧
Keep your tape right where you need it with this tough-as-nails Electrical Tape Dispenser. Made from high-quality ASA plastic, it’s designed to survive heat, UV, and whatever chaos your toolbox throws at it.
It fits standard electrical tape rolls and dispenses smoothly—no more fumbling with tangled messes. Compact, lightweight, and built to last, it’s a no-brainer addition to any tradie kit or workshop.
Whether you're rewiring a switchboard or patching things up on the fly, this dispenser saves time, cuts stress, and keeps you moving.
I aim to have orders out of the workshop and on their way within 2–5 days. Larger or fully custom pieces may take a little longer, but don’t worry, you’ll always be kept in the loop throughout the process!
I aim to have orders out of the workshop and on their way within 2–5 days. Larger or fully custom pieces may take a little longer, but don’t worry, you’ll always be kept in the loop throughout the process!
A little arcade for your Switch
Give your Nintendo Switch its own spot in your gaming setup. This personalised arcade stand holds the console upright, with a retro arcade shape and a custom nameplate across the front. Add your name and it becomes “[Name]’s Arcade”, which is admittedly a pretty good name for a place where you lose three hours to one game.
The compartment at the back gives your Joy-Cons and smaller accessories somewhere to go, while a slot lets you feed a charging cable through the stand.
Make It Yours
Enter the name you want on the front.
Choose the filament colour for the name.
Check the spelling before you place your order. Your arcade deserves the right name above the door.
Product Details
Upright arcade-style Nintendo Switch stand
Personalised “[Name]’s Arcade” nameplate
Rear compartment for Joy-Cons and small accessories
Slot for a charging cable
Made to order in Yarrawonga, Victoria
I aim to have orders out of the workshop and on their way within 2–5 days. Larger or fully custom pieces may take a little longer, but don’t worry, you’ll always be kept in the loop throughout the process!
I aim to have orders out of the workshop and on their way within 2–5 days. Larger or fully custom pieces may take a little longer, but don’t worry, you’ll always be kept in the loop throughout the process!
Say goodbye to tangled cords and messy drawers. This compact organiser keeps your USB cables, chargers, earphones, and other slim cords (up to 1.2m) neat, secure, and easy to grab when you need them.
Perfect for desks, bedside tables, travel bags, and anywhere chaos strikes.
Details:
Fits most standard cords and chargers
Lightweight and space-saving
Durable 3D printed design
Quick wrap-and-go storage
Keep your cables in line—because untangling wires is nobody’s hobby.
I aim to have orders out of the workshop and on their way within 2–5 days. Larger or fully custom pieces may take a little longer, but don’t worry, you’ll always be kept in the loop throughout the process!
I aim to have orders out of the workshop and on their way within 2–5 days. Larger or fully custom pieces may take a little longer, but don’t worry, you’ll always be kept in the loop throughout the process!
Make perfect cutouts every time with this Circle Cutout Marking Template—designed for fast, accurate marking on plasterboard without the guesswork. Just place your screwdriver through the centre point, rotate to your needed size, and trace a clean, consistent circle with a pencil.
Made from high-quality ASA plastic, this template is built tough for job sites—UV resistant, heat resistant, and warp-resistant, so it holds up in real working conditions. The back is white to avoid leaving marks on the wall while you’re tracing.
Includes diameter and radius markings for 70mm, 90mm, 160mm, 200mm, 240mm, 250mm, and 300mm—ideal for downlights, fans, speakers, and more.
No more dodgy circles. No more wasted time. Just a simple tool that works.
I aim to have orders out of the workshop and on their way within 2–5 days. Larger or fully custom pieces may take a little longer, but don’t worry, you’ll always be kept in the loop throughout the process!
I aim to have orders out of the workshop and on their way within 2–5 days. Larger or fully custom pieces may take a little longer, but don’t worry, you’ll always be kept in the loop throughout the process!
Tame the Tangle with the Cable Organising Block Set
Keep your cords under control with this 5-piece cable organiser set! Each block holds 1–5 cables, helping you declutter and customise your setup your way. Just add your own adhesive and stick them wherever they're needed.
✔ Includes 5 blocks (1–5 cable slots)✔ Sleek and minimal design✔ Perfect for desks, workstations, or behind the TV✔ Made from durable 3D printed material✔ Each block: 24mm H x 24mm D (width varies by slot count)
Simple, stylish, and ridiculously handy.
I aim to have orders out of the workshop and on their way within 2–5 days. Larger or fully custom pieces may take a little longer, but don’t worry, you’ll always be kept in the loop throughout the process!
I aim to have orders out of the workshop and on their way within 2–5 days. Larger or fully custom pieces may take a little longer, but don’t worry, you’ll always be kept in the loop throughout the process!
Celebrate in shining style with this bold Star Number Cake Topper—perfect for birthdays, milestones, or any moment worth a little extra sparkle.
Each topper features your chosen number framed inside a statement star, ready to sit proudly atop any cake. Made from premium acrylic with a gold shimmer finish (as pictured), it’s bold, fun, and guaranteed to stand out in party pics.
Want a different colour? Select one from the dropdown—or leave it blank to stick with the gold shimmer look.
Approx. 110mm tall from the bottom of the stars.A perfect mix of fun, glam, and cake-worthy cool.
I aim to have orders out of the workshop and on their way within 2–5 days. Larger or fully custom pieces may take a little longer, but don’t worry, you’ll always be kept in the loop throughout the process!
I aim to have orders out of the workshop and on their way within 2–5 days. Larger or fully custom pieces may take a little longer, but don’t worry, you’ll always be kept in the loop throughout the process!
Bring the sass to your snack spread with this engraved bamboo charcuterie board—perfect for cheese, meats, pizza, or anything else worth showing off. Each board features a cheeky design (yep, “fancy sh*t” included), adding a playful twist to your grazing table.
With multiple designs to choose from and the option to personalise the back with a name, this board isn’t just functional—it’s flipping fabulous.
Gift-ready in a sleek, labelled box, it’s a winner for birthdays, housewarmings, or anyone who loves snacks and a good laugh.
Size: 350mm x 180mm x 12mm
I aim to have orders out of the workshop and on their way within 2–5 days. Larger or fully custom pieces may take a little longer, but don’t worry, you’ll always be kept in the loop throughout the process!
I aim to have orders out of the workshop and on their way within 2–5 days. Larger or fully custom pieces may take a little longer, but don’t worry, you’ll always be kept in the loop throughout the process!
Angel Heart Phone Holder – Sweet, Sassy & Handy 😇💕
Add a playful twist to your setup with this heart-shaped phone holder, complete with angel wings for that pure (but still a little cheeky) vibe. Whether you’re binging shows, scrolling endlessly, or just need a cute stand for your bedside, this one brings the charm.
Crafted from durable material with a universal fit, it holds your phone upright or sideways with no fuss. The glossy wings click into place and add that perfect little extra without getting in the way.
Only available with angel wings for now—devil version sold separately (because balance, right?).
Size: Approx 85mm wideColour: Red base with white angel wingsMaterial: PLA
This one’s for anyone who likes their tech with a little personality and their desk with a little heart.
I aim to have orders out of the workshop and on their way within 2–5 days. Larger or fully custom pieces may take a little longer, but don’t worry, you’ll always be kept in the loop throughout the process!
I aim to have orders out of the workshop and on their way within 2–5 days. Larger or fully custom pieces may take a little longer, but don’t worry, you’ll always be kept in the loop throughout the process!
For the readers who definitely didn’t come for the plot… but stayed for it anyway. This PU leather bookmark features a bold skull and dagger design with Read Spicy engraved front and centre — a little warning to anyone judging your TBR pile.
Available in black or brown PU leather with gold or silver engraving, it’s sturdy enough for daily reading and dramatic enough to match your favourite unhinged book moments. Finished with a matching tassel because even spicy reads deserve good accessories.
Size: approx. 170mm x 60mm x 11mm
I aim to have orders out of the workshop and on their way within 2–5 days. Larger or fully custom pieces may take a little longer, but don’t worry, you’ll always be kept in the loop throughout the process!
